Alliance Laundry Systems LTS97A*N, Руководство по обслуживанию

Страница: 15 / 126

801803
13
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect all electric power to the machine and accessories before servicing.
• Close gas shut-off valve to gas dryer before servicing.
• Never start machine with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the machine is properly grounded.
• Washer motor not grounded! Disconnect electric power before servicing motor.
W502
WARNING
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Troubleshooting
Dryer
IMPORTANT: Refer to wiring diagram for aid in testing dryer components.
2. DRYER MOTOR DOES NOT RUN
POSSIBLE CAUSE TO CORRECT
Electrical power off, fuse blown, or power cord not
plugged in. • Check laundry room for blown or loose fuse(s), or open
circuit breaker(s). The dryer itself does not have an
electrical fuse.
• Check both fuses for electric models.
Loading door not closed. • Close door.
Inoperative door switch. • Test switch and replace if inoperative.
Timer improperly set. • Reset timer or try another cycle.
Inoperative timer. • Test timer and replace if inoperative.
Motor starting functions inoperative.
Does not start, or motor just hums. • Refer to Paragraph 88 to check motor switch and motor
windings.
Motor is dead, will not run. • Refer to Paragraph 88 to check motor switch, motor
windings, and main windings.
Motor overload protector has cycled. • Wait two or three minutes for overload protector to reset.
If protector cycles repeatedly, refer to Paragraph 3.
Motor centrifugal switch sticky or plugged with
lint. • Remove dust or lint and spray with a cleaner and lubricant.
Bind in motor bearing. • Remove belt and determine if motor shaft will spin.
• Replace motor if shaft is locked up.
Loose motor wire harness connection block. • Firmly press connection block onto motor switch.
Broken, loose, or incorrect wiring. • Refer to wiring diagram.
Power cord is miswired. • Refer to wiring diagram for the correct wiring.