Alliance Laundry Systems CHD25E2-CT025E, Руководство по программированию

Страница: 27 / 55

Programming Control
What Can Be Programmed?
This feature allows the owner to program cycle parameters and
other features by using the keypads. The control must have the
Manual Programming Mode enabled, which is the factory de-
fault. This mode can only be turned OFF and ON by using an ex-
ternal device. Refer to this section when programming the con-
trol.
For an overview of the programming organization, refer to the
flowcharts on the following pages.
For more advanced users, a quick reference list of the options
available through the programming mode is located below.
NOTE: The codes in the Option Display column of the
Programmable Options List are what will show in the
display when that option is selected.
How to Program a Cycle
1. Press the Up or Down keypad to scroll through the option list.
2. Press Start to select an option to program.
3. Press the Up or Down keypad to change the value of that op-
tion.
4. Press Start to save the change.
NOTE: Press the Back keypad to leave the option
without saving any change.
5. After pressing Start , control will go to the next option in the
list.
6. Press Back keypad to go to Idle Mode.
Programmable Options Available
Option
Number Option
Display
Description
Default
Value
Value Range
1
CyCLE-
Cycle Programming - -
a
CyCHH-
Cycle HH (HH represents
cycles 1-30) - -
1
CHHEn
Cycle HH Enable Disable - on/oFF
2
CHHtyP
Cycle HH Type - tinE (Time Dry), Auto (Auto Dry), noiSt (Moisture
Dry)
3
CHHnt
Cycle HH Matieral Type - 0 (Cotton), 1 (Blend), 2 (Bedding), 3 (Delicate), 4
(Synthetic), 5 (Wool)
4
CHHtPt
Cycle HH Time Past Target
(minutes) - 0-15
5
CHHS1-
Segment 1 - CHHS11 (Segment 1 Enable/Disable), CHHS12
(Segment 1 Time), CHHS13 (Segment 1 Tempera-
ture), CHHS14 (Segment 1 Auto Dry Target Level),
CHHS15 (Segment 1 Moisture Dry Target Moisture),
CHHS16 (Segment 1 Reversing Enable/ Disable)
6
CHHS2-
Segment 2 - CHHS21 (Segment 2 Enable/Disable), CHHS22
(Segment 2 Time), CHHS23 (Segment 2 Tempera-
ture), CHHS24 (Segment 2 Auto Dry Target Level),
CHHS25 (Segment 2 Moisture Dry Target Moisture),
CHHS26 (Segment 2 Reversing Enable/ Disable)
Table continues...
Programming Control
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
27 Part No. 70444901ENR10