Alliance Laundry Systems AT0350SRG, Руководство по обслуживанию

Страница: 51 / 60

70143101
49
Section 5 Service Procedures
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the tumbler before servicing.
• Close gas shut-off valve to gas tumbler before servicing.
• Close steam valve to steam tumbler before servicing.
• Never start the tumbler with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the tumbler is properly grounded.
W002
WARNING
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
STAND ALONE TUMBLE DRYER
Refer to Figure 43 .
a. Remove two screws holding drive access cover
in place. Remove door. Refer to Figure 31 .
b. Lift motor up.
c. Reach into cabinet and disconnect belt by
rolling off pulley.
d. Unscrew bolt at end of shaft.
e. While supporting motor, remove four bolts on
top of motor.
f. Disconnect spring.
g. Remove motor.
Figure 43
T163KE3B
Washer
Drive
Access
Cover
Idler
Pulley
Motor
Pulley
Belt
Cylinder
Tension
Sprin g
Motor
Assembly