Alliance Laundry Systems AT0350SRG, Руководство по обслуживанию

Страница: 23 / 60

70143101
21
Section 5 Service Procedures
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the tumbler before servicing.
• Close gas shut-off valve to gas tumbler before servicing.
• Close steam valve to steam tumbler before servicing.
• Never start the tumbler with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the tumbler is properly grounded.
W002
WARNING
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
DOOR SWITCH (EU Models)
Refer to Figure 6 .
NOTE: EU Models are equipped with a second door
switch.
a. Remove two screws from the loading door
hinge lug. Refer to Figure 1 .
b. Remove screws from top and sides of front
panel and loosen screws at bottom of front
panel. Refer to Figure 4 .
STACKED TUMBLE DRYERS ONLY:
Refer to Paragraph 16 .
a. Remove lint drawer and screws.
b. Tilt front panel out and away from tumble dryer
only far enough to permit disconnecting wires
from door switch.
NOTE: Refer to wiring diagram when rewiring
door switch.
c. Remove two screws and nuts holding door
switch to bracket on inside of front panel.
Figure 6
T275SE1A
EU
DOOR
SWITCH
SCREWS