8
505048
Before You Start . . .
Tools
For most installations, the basic tools you will need are:
Exhaust
Use rigid metal duct and exhaust the dryer to the outside
by the shortest route possible.
NOTE: For more detailed information, refer to
Section on
Dryer Exhaust Requirements
.
Electrical
•
ELECTRIC DRYER
Dryer needs a 3 or 4 wire 120/
240 or 120/208 Volt, 60 Hertz, AC single Phase
electrical supply.
•
GAS DRYER
Dryer needs a 120 Volt, 60 Hertz, polarized 3-slot
effectively grounded receptacle.
NOTE: For more detailed information, refer to
Section on
Electrical Requirements
.
Gas
Dryer is equipped for Natural Gas with a 3/8" NPT gas
supply connection. For more detailed information, refer
to Section on
Gas Requirements
.
Location
Place the dryer on a solid floor with an adequate air
supply. For more detailed information, refer to Section on
Location Requirements
.
D074IE1F
DUCT TAPE
TEFLON TAPE
WRENCH
LEVEL
SCREWDRIVERS
D367IE1A
