24
505048
Location Requirements . . .
Select a location with a solid floor.
No other fuel burning appliance should be installed in the
same closet with the dryer.
The dryer must not be installed or stored in an area where
it will be exposed to water and/or weather.
Leveling legs can be adjusted from inside the dryer with
a 1/4" driver. All four legs must rest firmly on the floor so
the weight of the dryer is evenly distributed. The dryer
must not rock.
The dryer needs sufficient clearance and an adequate air
supply for proper operation and ventilation, and for easier
installation and servicing. (Minimum clearances are
shown below.)
D366IE3B
FRONT VIEW
(w/o Closet Door)
SIDE VIEW
A
A
C
A
D
E
B
OUTER
WALL OF
ENCLOSURE
**42"
(107 cm)
** NOTE: For new installations, locate top of wall vent 42 inches (107 cm) above floor to make venting
easier to connect.
AREA
DESCRIPTION
FREE STANDING /
ALCOVE INSTALLATION
(See Illustration)
A
Dryer sides and rear clearance
0" (0 cm)
B
Dryer top clearance
12" (30.5 cm)
C
Dryer front clearance
Not Applicable
D
Exhaust duct clearance to
combustible material
2" (5.1 cm)
E
Weather hood to ground
clearance
12" (30.5 cm)
(Minimum clearances are shown.)
