23
Step 1: Connect to a battery
1
Connect the
black
alligator clip to the negative
terminal (-). Connect the
red
alligator clip to the
positive terminal (+).
Step 2: Connect to the reader
1
Remove the protective cap which covers the reader’s
cable connector, and which guards the reader against
foreign material contamination.
Install the data-power cable by engaging the
connector and rotating the lock-ring.
2
Then connect the other end of the battery cable into
the power socket located at the end of the reader’s
data-power cable
Step 3: Checking the reader
1
Once you are connected to a power source, the reader
display’s backlight will turn on.
Press the green button momentarily and notice the
flashing red light. This indicates that the reader is
receiving power.
