Allett BUFFALO 24" Скачать руководство пользователя

Страница: 26 / 68

Checking the fuel level

WARNING - PREVENT ACCIDENTS

Wear protective gloves and safety glasses

•

Locate the fuel tank on top of the engine.

•

Remove the fuel cap and visually check the fuel

level. Fill the tank before storing overnight in
order to reduce internal condensation.

•

The maximum fuel level is as shown.

•

Never over fill the fuel tank.

Checking belt/chain guards

•

There are two guards to check:

1. Main cover (Top of mower).

2. Plastic belt guard (LH side of mower).

WARNING - PREVENT ACCIDENTS

Always wear gloves when handling the cylinder.

Checking the cutting cylinder

•

Visually inspect the cutting cylinder and the bottom blade for any damage,

misalignment or distortion.

•

The cutting performance of the Buffalo mowers is highly dependent on the

condition of both the cylinder and bottom blade. Poorly maintained parts will
lead to a poor quality of cut.

•

It is advised that the grinding / reconditioning of the cylinder and bottom blade

be carried out by either Turfmech Machinery Limited or an authorised Allett
dealer.

Содержание BUFFALO 24"





































































Результаты поиска

Содержание BUFFALO 24"

Отзывы:

Похожие инструкции для BUFFALO 24"

Бренды по названию

Популярные бренды

Allett BUFFALO 24", Руководство оператора и каталог запасных частей

Результаты поиска

Содержание BUFFALO 24"

Отзывы:

Похожие инструкции для BUFFALO 24"

Бренды по названию

Популярные бренды