Allett BUFFALO 24", Руководство оператора и каталог запасных частей

Страница: 22 / 68

16
Maintenance
Regular maintenance is essential for the continued safe operation of the Buffalo
mower. Correct servicing will prolong the working life of the machine and safeguard
the warranty.
Always fit genuine Allett parts, fitting spurious parts will invalidate the warranty.
The following information is given on the understanding that Turfmech Machinery
Limited accepts no responsibility for work carried out by a customer or for any damage
thus caused, whether or not the service instructions have been misunderstood.
To ensure that the warranty terms are not breached service work should be carried
out by Turfmech Machinery Limited or an authorised Allett dealer.
The notes on engine care and maintenance in this manual are for guidance only, refer
to your engine manual before carrying out repairs or maintenance on your engine.
SAFETY NOTICE
WARNING - PREVENT ACCIDENTS
When carrying out maintenance procedures it is essential that:
-
The engine is not running.
-
The parking brake is engaged.
-
The cutting cylinder is disengaged.
-
The rear roller drive is disengaged.
-
The safety precautions in this manual have been read and understood.
WARNING - PREVENT ACCIDENTS
Engine oil will be hot after machine use. Allow the engine to cool before
working on the machine, particularly when changing oil.
Always wear thick gloves when manually rotating a cutting cylinder.
Take care to prevent entrapment of the fingers between moving blades and
fixed parts during maintenance activities.
To reduce the risk of fire, keep the engine and exhaust area free of grass,
leaves and other debris. Wipe off excess grease.
Frequently check fuel lines and fittings for cracks or leaks and replace if
necessary.
If the fuel tank has to be drained this should be done outdoors.
Ensure that all safety decals are properly secured and in good condition.
Check that all nuts, bolts and screws are sufficiently tight so as to ensure that
the equipment is in safe working condition.
Replace worn or damaged parts.