manualshive.com logo in svg

allen SSE12, Руководство по эксплуатации и запасным частям, Страница: 75 / 76

Поделиться
Скачать
allen SSE12 Скачать руководство пользователя страница 75

Copyright © 2018 Allen Engineering Corporation
All rights reserved 

All information, specifications, and illustrations in this manual are subject to change without notice and 

are based on the latest information at the time of publication. No part of this manual may be reproduced or 
transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express 
written permission of Allen Engineering Corporation (AEC). AEC assumes no responsibility or liability for 
any errors or inaccuracies that may appear in this manual.

Allen Products are covered under one or more of the following patent numbers:

U.S. Design Patents: 

344,736; 400,542; 400,544; 402,998; 402,999; 403,332; 404,041; 404,042; 

410,931; 413,127; 416,564; 465,897; 466,909; 474,203.

U.S. Utility Patents: 

5,108,220; 5,238,323; 5,328,295; 5,352,063; 5,405,216; 5,476,342; 5,480,257; 

5,480,258; 5,533,831; 5,562,361; 5,567,075; 5,613,801; 5,658,089; 5,685,667; 5,803,658; 5,816,739; 
5,816,740; 5,890,833; 5,934,823; 5,967,696; 5,988,938; 5,988,939; 6,019,433; 6,019,545; 6,048,130; 
6,053,660; 6,089,786; 6,106,193; 6,857,815; 5,288,166; 6,582,153 B1, 7,108,449; 7,114,876; 
7,316,523; 7,690,864 B2

Canadian Patents: 

2,039,893.

Printed in U.S.A.

Содержание SSE12













































































Отзывы:

Нет отзывов