allen 068344 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 44

background image

068521

Page 15

SECTION 1

SAFETY

Familiarity and proper training are required for the safe operation of this equipment!

Equipment operated improperly or by untrained personnel can be dangerous! Read

the operating instructions contained in both this manual and the engine manual and

familiarize yourself with the location and proper use of all controls.

• NEVER

operate this machine in applications for which it is not intended.

• NEVER

operate this machine while under the influence of drugs or alcohol.

• NEVER

allow anyone to operate this equipment without proper training. People operating

this equipment must be familiar with the risks and hazards associated with it.

• NEVER

touch the engine or muffler while the engine is on or immediately after it has

been turned off. These areas get hot and may cause burns.

• NEVER

use accessories or attachments that are not recommended by AEC. Damage to

equipment and injury to the user may result.

• NEVER

operate the machine with the belt guard missing. Exposed drive belt and pulleys

create potentially dangerous hazards that can cause serious injuries.

• NEVER

leave machine running unattended.

• DO NOT

run the machine indoors or in an enclosed area such as a deep trench unless

adequate ventilation, through such items as exhaust fans or hoses, is provided. Exhaust
gas from the engine contains poisonous carbon monoxide gas; exposure to carbon mon-
oxide can cause loss of consciousness and may lead to death.

• ALWAYS

remain aware of moving parts and keep hands, feet, and loose clothing away

from the moving parts of the equipment.

• ALWAYS

keep hands, feet, and loose clothing away from moving parts of the machine.

• ALWAYS

read, understand, and follow procedures in the Operator’s Manual before

attempting to operate the equipment.

• ALWAYS

be sure operator is familiar with proper safety precautions and operation tech-

niques before using machine.

• ALWAYS

close fuel valve on engines equipped with one when machine is not being

operated.

• ALWAYS

store the equipment properly when it is not being used. Equipment should be

stored in a clean, dry location out of the reach of children.

• ALWAYS

operate the machine with all safety devices and guards in place and in working

order.

Operating Safety

«
...
13
14
15
16
17
...
»

Содержание 068344













































Отзывы:

Нет отзывов

Похожие инструкции для 068344

Бренд: Beton Trowel Страницы: 32

RIDE ON BT900 2PFH

Бренд: Beton Trowel Страницы: 35

BT120-2/4/HPFV35

Бренд: Beton Trowel Страницы: 39

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды