allen 068344, Инструкция по безопасности и эксплуатации

Страница: 27 / 44

068521 Page 27
SECTION 2
OPERATION
Engine Control
5
10
2
7
6
4
9
3
1
8
11
12
1. Fuel Filler Cap – Remove this cap to add unleaded gasoline to the fuel tank.
Make sure cap is tightened securely. DO NOT over fill.
2. Throttle Lever
– Used to adjust engine RPM speed (lever advanced forward
SLOW, lever back toward operator FAST).
3. Engine ON/OFF Switch (if equipped) – ON position permits engine starting, OFF
position stops engine operation.
4. Recoil Starter (pull rope) – Manual-starting method. Pull the starter grip until
resistance is felt, then pull briskly and smoothly.
5. Gasoline Fuel Shut-Off Valve – OPEN to let fuel flow, CLOSE to stop the flow
of fuel.
6. Choke Lever – Used in the starting of a cold engine, or in cold weather condi-
tions. The choke enriches the fuel mixture.
7. Air Cleaner – Prevents dirt and other debris from entering the fuel system.
Remove wing-nut on top of air filter cannister to gain access to filter element.
8. Gaseous Fuel Selector Valve – Used for determine the type of fuel that is being
used by the engine.
9. Dipstick / Oil Fill Plug – Used to check oil level of engine.
10. Gasoline Fuel Tank
– Holds unleaded gasoline.
11. Oil Drain Plug – Remove this plug to remove oil from the engine’s crankcase.
12. Gaseous Fuel Regulator – Used to regulate the LP fuel to the engine.