background image

(20)

DIR 1000587R0002 (Version 02)

3.5.2. Menu 

Area

The menu area features a tree structure allowing all the information and parameters to be managed with various levels of detail.
The main menu, which the user can access by pressing ESC from the default page, includes 5 options:

Main Menu Option

Description

Paragraph

1. Protections

Reading and adjustment of all the protections available

3.6

2. Measurements

Reading of all the measurements made by the trip unit, Trip and events

3.7

3. Settings

Reading and adjustment of the main settings of the trip unit, CB and modules 

3.9

4. Test

Allows diagnosis and state control tests to be performed

3.10

5. Information

Reading of the main details about the trip unit and CB

--

The various different menus are described in the sections indicated in the table.

3.5.2.1. Menu 

browsing

The operator can browse within each level by using the main push-button panel:
- ENTER to access a submenu or confi rm an edited parameter
- ESC to quit a submenu or annul the changes made to a parameter
- UP and DOWN to scroll the menu options

The editing menus can only be accessed after the user password has been entered.

The parameters can be edited by scrolling the options available in the specifi c menu and by selecting the required option with 
the ENTER button. Some of the parameters update immediately (such as the date) while others require confi rmation (CONFIRM).
To accomplish the CONFIRM operation, the operator must quit the menus through to level 1 where there is a new page called 
PROGRAMMING in which 3 options can be chosen: 
- CONFIRM: confi rms the changes made
- ANNUL: annuls the changes made
- EDIT: allows the operator to browse the menus again and make further changes to the parameters.
Selection of the fi rst two options accesses a temporary window giving the programming result (parameters updated or operation 
annulled).

1/3

C

on

f

irm

Abort

Modify

Confirm

Programming

Содержание LSIG






































Отзывы: