Allen-Bradley InView Marquee 2706-P42, Руководство пользователя

Страница: 124 / 212

Publication 2706-UM016A-EN-P - June 2002
7-20 DeviceNet Communications with Dual DNI
1. The first thing to do when setting up to use the FlexLogix is to
open a new application.
2. Then set up the controller properties by right-clicking on the
controller name and selecting properties and then the serial port
tab as follows:
•
Mode under Serial Port Tab is System,
•
Under the System Protocol Tab shown next the error
detection must be CRC.
3. The next thing to do is to create the different file types needed
for this program. In the ladder example below the following file
types are used.
TIP
When using the DNI Utility make sure that DF1
autobaud is disabled, and that the DF1 baud rate is
set for 9600 baud.