background image

Rockwell Automation Publication 1441-UM003A-EN-P - May 2011

7

Chapter

 1

Installing Optional Extension Modules

The data collector uses the Extension Manager to install and uninstall extension 
modules. These extension modules are licensed and ordered separately from the 
basic entry-level product.

The installation Secure Digital (SD) cards that you receive work with any 
Dynamix 2500 data collector. Once you have installed an extension module, the 
card is locked so that it can be used only with that instrument. 

You can uninstall extension modules, if required. When uninstalling an extension 
module, you have the option to free up the license so you can install the extension 
module on another instrument. This makes the extension module available to be 
transferred between units.

Topic

Page

Install an Extension Module

8

Uninstall an Extension Module

10

Manage Extension Modules

12

Extension Module Battery Status Indicators

13

IMPORTANT

One installation SD card is required for each instrument that needs to 
be upgraded.

IMPORTANT

When ever you re-run the OS Loader software, you will re-load only the 
main OS firmware. The OS loader will backup licence files and data, but 
not the optional extension modules. Once you have updated the OS 
firmware, install the latest version of your optional extension modules.

See the Dynamix 2500 Data Collector User Manual, 

1441-UM001

, for 

more information.

Содержание Dynamix 2500

































Отзывы: