Allen-Bradley DeviceNet 1784-PCIDS, Руководство пользователя, Страница: 71 / 101

1 Publication 1784-6.5.30 - February 2001
Appendix
B
Creating and Running
a SoftLogix 5 Application
What This Appendix
Contains
This appendix describes the procedure to create, download, and run a
SoftLogix 5 ladder program to test the DeviceNet network described
in this manual. When the program is put into Run mode, pressing the
START button on the network’s RediSTATION will cause the red
indicator light to come on and stay on until the STOP button is
pressed. Passing an object in front of the photoeye will increment a
counter.
We use RSLogix 5 programming software to create and download the
ladder program. For this example, we assume that RSLogix 5 is
running on the same computer as the SoftLogix 5 controller engine. It
is also possible to run RSLogix 5 on a workstation or programming
terminal communicating with the SoftLogix controller over an Ethernet
or Data Highway Plus network.
The following table describes what this appendix contains and where
to find specific information.
IMPORTANT
Make sure you have completed the installation and
configuration of the example DeviceNet network
described earlier in this manual before creating this
SoftLogix 5 application.
IMPORTANT
You must have administrative or programmer rights
in SoftLogix 5 in order to create and run the example
application. Check with your system administrator.
For information about See page
Configuring the RSLinx SoftLogix 5 Driver B-2
Configuring the SoftLogix 5 DeviceNet Driver B-4
Putting the SoftLogix Controller in Remote Mode B-6
Creating the Example Application Program B-7
Downloading the Program B-10
Running the Example Program B-11
Allen-Bradley Parts