Allen-Bradley DeviceNet 1784-PCIDS, Руководство пользователя, Страница: 43 / 101

Publication 1784-6.5.30 - February 2001
Configuring the DeviceNet Network 4-5
You should receive the following message.
If the tests fail you have a hardware problem in your computer.
The card may be defective, improperly seated in its slot, etc. Note
that these are simply basic hardware tests on your machine and do
not indicate a network problem. (The card does not have to be
configured or connected to the network to perform the tests.)
6. Click on OK .
7. In the DeviceNet Port Setup area of the Driver Configuration
window, make sure the Node Address and Network Baud Rate
are correct (we used Node Address 0 and a Baud Rate of 500K for
the example network).
8. Click on OK . You will be prompted to choose a name for the new
RSLinx driver.
9. Accept the default name (1784-PCIDS-1) and click on OK .
IMPORTANT
Your DeviceNet network must be connected and
powered up before continuing.
Allen-Bradley Parts