Allen-Bradley DeviceNet 1784-PCIDS, Руководство пользователя, Страница: 61 / 101

Publication 1784-6.5.30 - February 2001
Using IOLinx To Test the Example Network 5-3
The 1784-PCIDS Driver Configuration window will appear.
4. In the DeviceNet Port Setup area, make sure the Node Address
and Network Baud Rate are correct (we used Node Address 0
and a Baud Rate of 500K for the example network).
Note: If you have multiple PCIDS cards installed in your computer
for your application, use the Serial Number pulldown window to
select the PCIDS you want to configure.
5. Click on Test Card .
You should receive the following message.
If the tests fail you have a hardware problem in your computer.
The card may be defective, improperly seated in its slot, etc. Note
that these tests are simply basic hardware tests on your machine
and do not indicate a network problem. The card does not have to
be configured or connected to the network to perform the tests.
6. Click on OK to acknowledge the “All Tests Passed!” message.
7. Click on OK to accept the driver configuration.
Allen-Bradley Parts