Allen-Bradley Compact GuardLogix 5380 Скачать руководство пользователя страница 107

Страница: 107 / 116

Rockwell Automation Publication 1756-RM012B-EN-P - April 2018

107

Glossary

symbolic addressing

A method of addressing that provides an ASCII interpretation of the tag name.

system reaction time

The worst case time from a safety-related event as input to the system or as a

fault within the system, until the time that the system is in the safe state. System

reaction time includes sensor and actuator Reaction Times, Input and Output

Reaction Times (including network connection delays), and the Controller

Reaction Time.

systematic capability (SC)

A confidence that the systematic safety integrity meets the requirements of the

specified safety integrity level (SIL). (from IEC 61508-4)

task

A scheduling mechanism for executing a program. A task provides scheduling

and priority information for a set of one or more programs that execute based

on a certain criteria. Once a task is triggered (activated), all programs assigned

(scheduled) to the task execute in the order in which they are displayed in the

controller organizer.

test edits

Once online edits have been accepted, there are two versions of user logic

residing in controller memory. The Test Edits command in the Studio 5000

Logix Designer application causes the controller to execute the new, edited

version of user logic. The original, unedited version of user logic is still in

controller memory, but is not executed. See

untest edits

timeout multiplier

This value determines the number of messages that can be lost before declaring

a connection error. See also

network delay multiplier

undetected failure

A failure that is undetected by diagnostic tests, proof tests, operator

intervention, or through normal operation.

untest edits

Once online edits have been accepted, there are two versions of user logic

residing in controller memory. The Untest Edits command in the Studio 5000

Logix Designer application causes the controller to execute the original,

unedited version of user logic. The new, edited version of user logic is still in

controller memory, but is not executed. See

test edits

valid connection

Safety connection is open and active, with no errors.

Содержание Compact GuardLogix 5380





















































































































Результаты поиска

Содержание Compact GuardLogix 5380

Отзывы:

Похожие инструкции для Compact GuardLogix 5380

Бренды по названию

Популярные бренды

Allen-Bradley Compact GuardLogix 5380, Оригинальное руководство пользователя

Результаты поиска

Содержание Compact GuardLogix 5380

Отзывы:

Похожие инструкции для Compact GuardLogix 5380

Бренды по названию

Популярные бренды