8
Rockwell Automation Publication 5069-IN010B-EN-P - November 2017
COMPACT 5000 Analog 8-channel Current/Voltage Input Module
5. Align the interlocking pieces of the module with the device on
the left.
The top interlocking pieces engage first.
6. Push the module toward the DIN rail until a click indicates
that the module is locked in place.
7. Verify that the module is installed in one of the following ways:
• If the module is installed next to a controller or adapter, the
front of the module is set back slightly from the front of the
controller or adapter.
• If the module is installed next to another I/O module, the
fronts of both modules are flush with each other.
Install the End Cap
You must install an end cap on the last module in your system.
1. Align the end cap with the interlocking pieces on the module.
2. Push the end cap toward the DIN rail until it locks in place.
ADAPTER
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Top
Interlocking
Pieces
Bottom
Interlocking
Piece
IMPORTANT
You install the end cap after the last module is installed on
the DIN rail. This design helps to prevent the end cap from
going beyond the locked position.
If you push the end cap beyond the locked position or insert it
from the backwards direction, you can damage the MOD
power bus and SA power bus connector.
ADAPTER
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
ADAPTER
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Interlocking
Pieces
End Cap
End Cap