Allen-Bradley AADvance T9110, Руководство по безопасности

Страница: 28 / 131

28 Rockwell Automation Publication ICSTT-RM446N-EN-P - April 2018
Chapter 1 Introduction
Certifications for Safety
System Applications in
Hazardous Environments ATEX Certificate
00-IC-F0060
– Issue 9.0
This certificate may only be reproduced in its entirety and without any change, schedule included.
Page 1 of 3
[1]
TYPE EXAMINATION CERTIFICATE

[2]
Equipment or Protective System intended for use
in Potentially Explosive Atmospheres
Directive 94/9/EC
[3] Type Examination Certificate Number:
DEMKO 11 ATEX 1129711X
Rev. 3
[4] Equipment:
Programmable Logic Controllers Models 9110 Processor, 9111 Processor, 9401 Digital Input,
9402 Digital Input, 9431 Analog Input, 9432 Analog Input, 9451 Digital Output, 9481 Analog Output, 9482
Output Input, 9100 Processor Backplane, 9101 Dual Backplane, 9300 I/O Backplane, 9801 Digital Input
Termination Assembly, 9802 Digital Input Termination Assembly, 9803 Digital Input Termination
Assembly, 9831 Analog Input Termination Assembly, 9832 Analog Input Termination Assembly, 9833
Analog Input Termination Assembly, 9851 Digital Output Termination Assembly, 9852 Digital Output
Termination Assembly, 9881 Analog Output Termination Assembly, 9882 Analog Output Termination
Assembly, 9892 Digital Output Termination Assembly.
[5] Manufacturer:
Rockwell Automation Ltd.
[6] Address
: Hall Road, Maldon, CM9 4LA, United Kingdom
[7] This equipment and any acceptable variation thereto are specified in the schedule to this certificate and the documents therein referred to.
[8] UL International Demko A/S certifies that this equipment has been found to comply with the Essential Health and Safety Requirements that
relate to the design of
Category 3 equipment, which is intended for use in potentially explosive atmospheres. These Essential Health and
Safety Requirements are given in Annex II to the European Union Directive 94/9/EC of 23 March 1994.
The examination and test results are recorded in confidential report no.
4786831849
[9] Compliance with the Essential Health and Safety Requirements, with the exception of those listed in the schedule of this certificate, has been
assessed by reference to Standards:
EN 60079-0:2012+A11:2013 EN 60079-15:2010
[10] If the sign " X " is placed after the certificate number, it indicates that the equipment or protective system is subject to special conditions for safe
use specified in the schedule to this certificate.
[11] This Type examination certificate relates only to the design of the specified equipment, and not to specific items of equipment subsequently
manufactured.
[12] The marking of the equipment or protective system shall include the following:

II 3G Ex nA IIC T4 Gc
Certification Manager
Jan-Erik Storgaard
This is to certify that the sample(s) of the Equipment described herein (“Certified Equipment ”) has been
investigated and found in compliance with the Standard(s) indicated on this Certificate, in accordance with the
ATEX Equipment Certification Program Requirements. This certificate and test results obtained apply only to
the equipment sample(s) submitted by the Manufacturer. UL did not select the sample(s) or determine whether
the sample(s) provided were representative of other manufactured equipment. UL has not established Follow-
Up Service or other surveillance of the equipment. The Manufacturer is solely and fully responsible for
conformity of all equipment to all applicable Standards, specifications, requirements or Directives. The test
results may not be used, in whole or in part, in any other document withou
t UL’s prior written approval.
Date of issue: 2011-09-02
Re-issued: 2015-06-10
Certification Body
UL International Demko A/S, Borupvang 5A, 2750 Ballerup, Denmark
Tel. +45 44 85 65 65,
info.dk@ul.com , www.ul.com