Industrial Computers for Hazardous Locations
27
Rockwell Automation Publication 6181X-IN001C-EN-P - April 2011
5.
Completely open the retaining latches securing the memory module
(1)
.
This forces the module up in the slot and makes it easier to remove.
6.
Gently remove the memory module from its slot
(2)
.
7.
Place the memory module on a static-dissipating work surface or inside an antistatic bag.
8.
Hold the new memory module by its edge and remove it from its protective packaging.
9.
Orient the module so that the notch on its bottom edge aligns with the keyed surface of
the DIMM slot
(1)
.
10.
Push the module at both ends to seat it fully into the slot
(2)
.
The holding clips will automatically lock into place once the module has been seated.
TIP
If you insert a memory module but it does not fit easily into the slot, you may
have inserted it incorrectly. Be sure of proper orientation and module type and
reinsert.
6181X-12TPXPDC Display Computer
