Allen-Bradley 6177R-MM Скачать руководство пользователя страница 24

Страница: 24 / 104

Rockwell Automation Publication 6177R-UM002E-EN-P - March 2017

Chapter 2

Install the Computer

Install the Computer

The computers support the following mounting options:

• Machine or wall mount (for 750R models)
• Rack mount (for 1450R models)

Mount the 750R Computer

You can mount the 750R computer on any flat surface, such as a shelf inside a
machine or against a wall, by using mounting brackets. Holes are provided on
both sides of the 750R computer for side mounting installation.

Follow these steps to mount the 750R computer.

1. Verify that the mounting location provides adequate space for cables and

airflow.

See

Mounting Clearance Requirements on page 22

for recommended

allowances.

2. Decide where to locate the mounting brackets (the bottom side for an

upright installation or the side for a wall installation).

3. Attach each mounting bracket to the computer with four screws.

Torque the screws to 1.3 N•m (12.1 lb•in).

TIP

For ease of installation, use two or more people to install the computer.

Bottom Mounting Brackets

Side Mounting Brackets

Содержание 6177R-MM









































































































Результаты поиска

Содержание 6177R-MM

Отзывы:

Allen-Bradley 6177R-MM, Руководство пользователя, Страница: 24 / 104

Результаты поиска

Содержание 6177R-MM

Отзывы: