Allen-Bradley 442L-SFZNMN Скачать руководство пользователя

Страница: 7 / 108

Rockwell Automation Publication 442L-UM005B-EN-P - April 2017

Preface

This user manual shows you how to mount, install, commission, operate, and

maintain your SafeZone Mini safety laser scanner correctly.

This user manual does not provide instructions for operating the machine,

system, or vehicle on which the safety laser scanner is, or will be, integrated.

This information can be found in the user manual for the machine, system, or

vehicle.

Summary of Changes

This manual contains new and updated information as indicated in the

following table.

Who Should Use This

Manual?

This user manual is intended for planning engineers, machine designers, and

the operators of machines and systems that are to be protected by one or several

SafeZone Mini devices. It is also for people that integrate SafeZone Mini

devices into a machine, system, or vehicle, initialize its use, or who are in charge

of servicing and maintaining the device.

Scope of Publication

This user manual is only applicable to the SafeZone Mini device with the

following entry on the type label in the field Operating Instructions (Part

Number 10000337275).

For the configuration and diagnostics of these devices, you require the Safety

Configuration and Diagnostic (SCD) software (version 3.0 or higher)

programming software. To determine the software version, select the Module

Info… option in the Help menu.

Depth of Information

This user manual contains information on the SafeZone Mini device in the

following parts:

IMPORTANT

Read this Preface carefully before working with this documentation and the
SafeZone™ Mini safety laser scanner.

Topic

Page

Updated Applications of the Device section.

Added Safe state in case of error to

Table 23

Added Safe state in case of error to Glossary.

101

• Mounting

• Fault diagnosis and troubleshooting

• Electrical installation

• Catalog numbers

• Commissioning and configuration

• Accessories

• Care and maintenance

• Conformity and approval

Содержание 442L-SFZNMN













































































































Результаты поиска

Содержание 442L-SFZNMN

Отзывы:

Похожие инструкции для 442L-SFZNMN

Бренды по названию

Популярные бренды

Allen-Bradley 442L-SFZNMN, Руководство пользователя

Результаты поиска

Содержание 442L-SFZNMN

Отзывы:

Похожие инструкции для 442L-SFZNMN

Бренды по названию

Популярные бренды