manualshive.com logo in svg

Allen-Bradley 1788-CN2FFR, Руководство пользователя, Страница: 64 / 104

Поделиться
Скачать
Allen-Bradley 1788-CN2FFR Скачать руководство пользователя страница 64

62

Rockwell Automation Publication 1788-UM057B-EN-P - September 2014

Appendix A

Linking Device Display Status

H1 Master Page

The next page that is accessed by the 
Page button is the H1 Master page.

Bus A/B:

 Displays the bus voltages, 

currents, and bus status.

Temperature:

 Displays the internal 

temperature of the linking device.

External Pwr:

 Displays the power 

supply voltage.

FF Node:

 Displays the H1 node 

address for the master (default 16).

BusA/B Enabled:

 H1 Bus A or H1 Bus B is enabled for communication.

BusA/B Tripped:

 H1 Bus A or H1 Bus B has tripped indicating that there was 

an over-current on either port.

BusA/B Term:

 The linking device is configured to terminate H1 Bus A or H1 

Bus B.

Field Device Page

The next 16 FF Field Device pages 
display the status of each of the field 
device indices.

FF Node:

 Displays the H1 node 

address.

Device Tag Name:

 The tag name of 

the device.

Status:

 Displays the field device status 

(see 

Table 9

.)

Table 9 - Field Device Status

Success:

 Displays the data packets that are received as a percentage of packets 

that are sent for the previous 100 packets.

Pckt Send:

 Displays the total number of data packets that are sent from the field 

device.

Status

Description

Not Connected

Device cannot be seen

Online

Online - not configured

ConfigRunning

Device is configured and 
running

Содержание 1788-CN2FFR









































































































Отзывы:

Нет отзывов