Rockwell Automation Publication 1769-UM021G-EN-P - October 2015
239
Use I/O Modules with CompactLogix 5370 L3 Controllers
Chapter 9
3.
If your system uses
more banks
, follow these steps.
a. Install a 1769-CR
x
Compact I/O communication bus expansion cable
at the right end of the
local bank
.
b. Connect the 1769-CR
x
cable to the additional bank as necessary.
That is, how you connect to the first extra bank—on the right or left
side of the bank, determines the expansion cable that is installed at the
end of the local bank. See
for examples of how to
connect a local bank to extra banks.
c. Complete the installation of the remaining banks in your system.
The following example shows example systems with local expansion
modules included.
Figure 38 - Example CompactLogix 5370 L3 Control Systems
Wire Local Expansion Modules
Wire each Compact I/O module that is used as a local expansion module
according to the technical documentation for that module.
IMPORTANT
Make sure that you install an end cap at the end of the last bank in
your system.
1769-CRL
x
Cable
Horizontal Orientation
Vertical Orientation
Bank 1
Bank 2
Bank 1
Bank 2
Bank 3
1769-CRL
x
Cable
1769-CRR
x
Cable
