ALLEN & HEATH XONE:4D Скачать руководство пользователя страница 18

Страница: 18 / 48

Allen & Heath

XONE:4D User Guide

INTRODUCTION TO THE XONE:4D

Welcome to the Allen & Heath Xone:4D digital DJ workstation. This system has

been designed with the help of some of the world’s most cutting edge DJs to

provide a seamless integration of traditional and computer-based audio replay

systems. The Xone:4D comprises three main sections:

MIXER

— The mixer is based on the award-winning Allen & Heath Xone:92. It

lets you mix a combination of vinyl, CD and other sources through 4 stereo

channels to its main mix and monitor outputs. It provides 2 effects send/return

loops, 3-band EQ isolators, 2 analogue VCF filters with LFO, VCA crossfader and

channel faders, DJ mic and cue monitoring system. A BPM counter can be set for

tap tempo or automatic beat detection.

MIDI CONTROLLER

— Two dedicated control strips provide a total of 105

MIDI messages from a combination of switches, rotary and fader controls, multi-

function jog wheels, foot pedal and game controllers. A MIDI shift mode allows all

of the controls to be mapped for a second time, giving the MIDI surface a second

‘page’. A fader pick-up algorithm has been incorporated into the mixer allowing

seamless integration of the pages. In addition, several mixer functions generate

and respond to MIDI, and the BPM counter provides MIDI start/stop and clock.

The Xone:4D provides full control of external MIDI devices including the most

sophisticated DJ performance computer environments. Overlays are available to

identify the control function for popular software applications.

SOUNDCARD

— A high performance 20-channel USB2.0 soundcard is built into

the mixer. The soundcard features 4 analogue stereo inputs and four analogue

stereo outputs, transmitting audio at 96kHz with 24 bit resolution. It uses USB to

interface the mixer audio and MIDI to a PC where the sound may be manipulated

in real time using one of the several exciting new DJ performance applications.

The soundcard also produces SPDIF COAX and optical digital inputs and outputs.

A low latency ASIO driver is provided for audio streaming between mixer and PC.

BPM

MIXER

MIDI

SOUNDCARD

FILTER 1

FILTER 2

CROSSFADER

MIC

PHONES

CUE

FX1

FX2

CH1

CH2

CH3

CH4

LFO

MONITOR

MASTER

Содержание XONE:4D

















































Результаты поиска

Содержание XONE:4D

Отзывы:

Похожие инструкции для XONE:4D

Бренды по названию

Популярные бренды

ALLEN & HEATH XONE:4D, Руководство пользователя

Результаты поиска

Содержание XONE:4D

Отзывы:

Похожие инструкции для XONE:4D

Бренды по названию

Популярные бренды