ALLEN & HEATH QU-PAC, Руководство по началу работы

Страница: 16 / 27

Qu-Pac Getting Started Guide 16 AP9815 iss2
Qu Mixer Requirements - The Qu mixer firmware and app feature release version
numbers must be the same, for example V1.6 firmware will not run with the V1.7
app. However, the maintenance version numbers do not need to be identical, for
example Qu-Pad V1.70 would run with Qu mixer V1.71. Refer to the Allen & Heath
web site for more information and to download the latest Qu mixer firmware.
Wireless devices – Qu-Pac supports Apple iOS devices including iPhone4 or later,
iPad, iPad Mini or iPod Touch running iOS7 or later.
Note – Current firmware supports up to two iPads running Qu-Pad , and up to 8
iPhones, iPads or iPod Touch devices running the Qu-You monitor app. However,
the maximum number of devices running a combination of Qu-Pad and Qu-You is 8.
Qu-Pad
is an engineer's mixing tool giving you the freedom to
walk the room or stage and control the sound where it is needed.
For example, for discrete mixing at corporate events, for live show
mixing in music bars where space and layout do not allow a
permanent FOH mix position, or for a band to sound check out
front and then mix from side of stage.
Qu-You
provides personal monitor mix control for musicians
and performers on stage. The engineer can still keep an eye on
and control each mix at the Qu mixer at any time.
Touch to select a mix. Once selected it can be locked to this mix
to prevent accidental selection of a different monitor mix. You can
also set processing preferences using this page.
Double tap to open the master processing (PEQ, GEQ, Comp).
Master fader and mute for the selected mix.
Channels can be assigned to up to 4 local groups, each with its
own thumbwheel level control.
Double tap a wheel to access its channel levels, pan and meters.
The currently selected mix name is displayed.
Connect to the wireless network – Connect and power up the wireless router. Wait
a few minutes for it to establish its broadcast. Connect the iOS device to this
network.
Start the app and log in to the Qu mixer – The app opens in its Login page. You
should see your Qu mixer in the list if it is recognised on the wireless network. Select
this and touch Connect.
More information – Read the app Help Manual by touching the ? button on its
Login page for further instructions on how to set up and operate it. Refer to the
Knowledgebase and Digital Community on the Allen & Heath web site.
CH PEQ shown LR mix selected, CH preamp shown
Custom Layer setup