ALLEN & HEATH GL4000, Руководство пользователя

Страница: 37 / 54

36
Q
UICK
S
OLO
QuickSolo is a system for checking individual signals or combinations of signals in the
mix. This is done by muting all channels except for the channel/s being soloed. It is
also known as '
solo-in-place' because the position and relative levels of the signal to
all the outputs is retained. QuickSolo affects the main outputs. This should not be
confused with the PFL/AFL monitoring system which affects only the monitor outputs.
QuickSolo is most useful during sound checking where you can listen to the contribution
of individual signals to the mix.
The GL4000 QuickSolo system lets you quickly solo selected channels using a two key
press that prevents accidental operation during a live performance. You can toggle
between your last selected solo setting and the full mix to compare the effect. You can
make selected channels 'solo safe' to prevent them being muted when QuickSolo is
activated. Typically you would solo safe the main outputs and the effects returns so
that the soloed channels are heard with effects. Safe channels can be previewed and
edited before operating QuickSolo. If not needed QuickSolo can be disabled.
U
SING
Q
UICK
S
OLO
Press and hold QUICKSOLO
The LED flashes to warn that the solo system is
armed ready for you to select a channel mute.
While holding QUICKSOLO press the mute of the channel
you want to solo.
All console mutes turn on except the selected channel
and any made 'solo safe'.
You can turn on or off other mutes while in solo mode
to hear the effect of combinations of channels.
Release QUICKSOLO
This returns the console to normal mute operation.
The previous mute settings are restored.
L
AST
S
OLO
Having set up a solo combination you may wish to compare the
effect of this with the complete mix. Instead of having to repeat the
selection of the channels as above you can recall your last solo
combination. You can toggle repeatedly between this and the mix
to judge the effect.
Press SHIFT + QUICKSOLO
The last solo combination is activated.
While holding SHIFT press and release QUICKSOLO
This toggles between the last solo and the mix.
Release SHIFT or QUICKSOLO to restore normal operation.