ALLEN & HEATH DL1000, Руководство пользователя

Страница: 35 / 60

10. S
ET THE
A
MPLIFIER
M
ODE
Decide which of the console mix busses is to be
configured to the
A
and
B
outputs. These route to the
built in amplifiers (
DP1000
) or to XLR outputs
(
DL1000
) to feed external amplifiers. The current
mode is displayed between the meters.
M FB
AUX
FB
L R
Press the
MODE
key. Press the
WX
keys to scroll
through the three options. Press the flashing
ENTER
key to accept the change,
UNDO
to escape. Press
RESET
to restore the default
LR
setting.
To avoid unexpected changes in volume
make sure the amplifier level controls are turned
down before changing the mode.
11. S
ET UP THE
M
ONITOR
M
IX
Set up an independent mix to send to the foldback
monitor speaker. Press the
FB
key to display the level
from each channel. You can also send the effects so
that you can add the required amount of reverb to the
monitor mix. The sends are pre fader so that the
monitor level is not affected by the channel fader.
The soft strip becomes the foldback send controls,
one for each channel. The normal operating level is
0dB but 6dB of gain is available if required. Press
RESET
to turn all the sends off. Press
UNDO
to restore
the last settings or those marked by pressing
ENTER
.
Press
AUX
to display the level sent to the independent
auxiliary output. This is similar to the foldback mix
but can be switched globally pre or post fader. Use
the pre fader setting when you require an additional
monitor. Use post fader when you require an
additional effects or recording mix.
12. W
ORK WITH THE MEMORIES
RECALL SONG
,
VENUE
and
SET
sequence memories
from the
HOME
screen when performing live. The
current song number and name are displayed in large
characters and the venue and set names in small
characters.
Stereo PA left and right speakers
Mono PA with foldback monitor
External PA, 2 monitors
The soft strip controls become selectors to scroll
through the memories. The
ST
keys duplicate
control 10 to let you step through the song memories
in incremental order. The
WX
keys duplicate
control 1 to let you step through the song memories
in the order in which they are programmed in the
selected set sequence. Press
ENTER
or
UNDO
to
confirm or escape recall of the displayed memory.
You can
STORE
the console settings in memory.
The graphic EQ and output mode settings are stored
in venue memories. The other parameters including
EQ, dynamics, effects, mix and channel mutes are
stored in song memories.
The
SONG
and
VENUE
keys:
STORE TO
Press
ENTER
to store the current mixer
settings to the displayed memory number. Use the
WX keys or soft strip control 10 (song) or 9 (venue)
to select a different memory number if required.
Note that this number becomes current after pressing
ENTER
.
RECALL
The memories can also be recalled within
the
SONG
or
VENUE
screens. Use the
WX
keys or
soft strip control 10 (song) or 9 (venue) to select a
different memory number if required. To recall the
same number press
X once first.
COPY
Press
COPY
while in the
STORE
or
RECALL
screen. This copies the current song or
venue settings to the copy buffer. The
PASTE
key
lights to show that valid data is available in the
buffer.
icon
SERIES
5 - 5