Avantis Getting Started Guide
14
AP11558 Issue 3
6.4
Assigning and un-assigning a channel to a Mix, Group or DCA
Press the
Mix
key on a Mix, Group or DCA
master strip (i.e. DCA 1)
Hold down the
Assign
key and press channel
Mix
keys to assign or unassign them from the
active mix. Assignment status is displayed in
the Name Block.
6.5
Changing between Sends on Faders and Sends on Rotaries
The default mixing mode is Sends on Faders.
To activate Sends on Rotaries, press the
Sends
button in the
Strip Rotary Mode section.
In Sends on Rotaries mode, Strip Rotaries are used to
control send levels to the active mix, with the channel
faders remaining as level controls to the Main Mix.
6.6
Setting Pre/Post fader send status
Hold down the
Pre
key and touch channel
Name Blocks
to toggle each source pre or
post fader. Current Pre/Post status is
displayed on the lower part of the Name
Block.
You can quickly set
all
assignments on or off, or all sources pre or post fader, by touching the Mix Master
Name Block
while holding
Pre
.
Send to AUX 1
To LR
DCA 1
IP 1
IP
1
LR
AUX
1
