4
connecting the meter in the circuit. Remember to place
the meter in series with the circuit.
When servicing the meter, use only specified
replacement parts.
Use caution when working above 30Vac rms, 42V peak,
or 60Vdc. Such voltages pose a shock hazard.
When using the probes, keep your fingers behind the
finger guards on the probes.
When making connections, connect the common test
lead before you connect the live test lead. When you
disconnect test leads, disconnect the live test lead first.
Remove the test leads from the meter before you open
the battery cover or the case.
Do not operate the meter with the battery cover or
portions of the case removed or loosened.
To avoid false readings, which could lead to possible
electric shock or personal injury, replace the battery as
soon as the low battery indicator ( "
" ) appears.
When in Relative Mode, the symbol " " is displayed.
Caution must be used because hazardous voltage
may be present.
When in MIN mode, the symbol
"
MIN
"
is displayed.
Caution must be used because hazardous voltage
may be present.
h.
i.
j.
k.
l.
p.
m.
n.
o.
