23
Using Relative Mode
Relative mode is available in some functions.
Selecting
relative mode causes the meter to store the present
reading as a reference for subsequent measurements.
1. Press the "
" button, the meter enters the relative
mode and store the present reading as a reference for
subsequent measurements, and " " appears as an
indicator. The display reads zero.
2. The display shows the difference between the reference
and a new measurement.
3. Press the "
" button again, the meter exits the
relative mode.
Data Hold Mode
After pressing the "
" button, the present reading is held
on the display, meanwhile " " is displayed on the LCD
as an indicator. To exit the Data Hold mode, press the
button again and the indicator " " will disappear.
Note:
For diode, continuity or transistor function, the
Data Hold mode is not available.
OPERATION INTRODUCTION
