3
This meter has been designed according to IEC-61010
concerning electronic measuring instruments with a mea-
surement category (CAT III 600 V) and pollution degree 2.
To avoid possible electric shock or personal injury, follow
these guidelines:
Warning
Do not use the meter if it is damaged. Before you use
the meter, inspect the case. Pay particular attention
to the insulation surrounding the connectors.
Inspect the test leads for damaged insulation or exposed
metal. Check the test leads for continuity. Replace
damaged test leads before you use the meter.
Do not use the meter if it operates abnormally.
Protection may be impaired. When in doubt, have the
meter serviced.
Do not operate the meter around explosive gas, vapor,
or dust.
Do not apply more than the rated voltage, as marked
on the meter, between terminals or between any
terminal and earth ground.
Before use, verify the meter's operation by measuring
a known voltage.
When measuring current, turn off circuit power before
a.
b.
c.
d.
e.
f.
g.
SAFETY INFORMATION
