HERA Series CD/DVD Duplication System / User Manual
5
Connecting power
Plug one power cable into the tower system, and the other one into the autoloader. Plug each power cable
into the proper power source and connect Serial Cable as shown in Fig. 4b for Hera-3 and 6 or Fig. 5b for
Hera-9.
The power On/Off switch for the tower is located in the front and the one for the autoloader is located in the
back. Power the tower on first, then turn on the autoloader.
Fig. 4a
HERA-9 - System assembled
Fig. 4b
Back view – cables (HERA-3 and 6)
Fig. 5a
