HERA Series CD/DVD Duplication System / User Manual
3
Operating Environment
Your CD/DVD System should be used in a climate-controlled environment free of dirt, dust, excess
humidity, excessive heat or electro-magnetic interference.
Allow at least four (4) inches of clearance around the sides and back of the system for ventilation.
Mounting the tower
For all systems, the tower is provided with a tower plate mounted on the bottom. This plate will help in
stabilizing the tower on the adapter (see Fig. 1 for Hera-3 and 6 or Fig. 5 for Hera-9)
Make sure all thumbscrews are loose, place the tower on top of the adapter matching the colored marks
(see Fig.2). Tight gently thumbscrews # 1 on both sides until they touch the adapter and then tight
thumbscrews # 2 (they consolidate the tower on the adapter) as shown in Fig. 3.
After the tower has been mounted successfully, proceed with “Connecting Power” (page 5) and “Drive
Alignment” (page 43)
In case you don’t have good alignment, loose all thumbscrews, adjust the tower (left and right, back and
forth) and tight back the thumbscrews as described above. Repeat the steps above until you obtain the
right alignment.
