ALL-O-MATIC SL-175 Скачать руководство пользователя страница 33

Страница: 33 / 48

SL-175 DC MONITORED ENTRAPMENT

PROTECTION DEVICE CONNECTION

COMMON

STOP CMD

COMMON

MON-12VDC

MON_OPEN

MON_CLOSE

PHOTO EYE

COM

N.C.

COM

EDGE

OPEN

PHOTO EYE

COM

N.C.

COM

OPEN
EDGE

C8RB

LMC64

82AIM

C8RB

LMC64

82AIM

58ADC1K

Ls07

1001

1002

2262

2402

20M

90R9

10R0

1000

1501

476E

900R3

476E

900R3

.01

I0615

710

829B

R616

90R9

10R0

1000

829B

R616

90R9

10R0

1000

829B

R616

602

S26

602

S26

IR21

10S

0618

IOR

IR21

10S

0618

IOR

IR21

10S

0618

IOR

IR21

10S

0618

IOR

ATMEL

ATMEGA168

20AU 0743

MAAF

S21B

101.

100

HFK.

7J2

100

HFK.

7J2

33 HFK 5GN

DR127-330

43CL07 E

CMX-309FB C

8.0000 M

535202

CMX-309FB C

8.0000 M

535202

CMX-309FB C

8.0000 M

535202

C8RB

LMC64

82AIM

1001

0022

1001

0022

MOC8050

629Q

MOC8050

629Q

MOC8050

629Q

MOC8050

629Q

710

KE.

710

KE.

710

KE.

710
KE.

710

KE.

710

KE.

710

KE.

1 2

OPEN

710
KE.

710

KE.

710
KE.

1 2 3 4 5 6 7 8

-----------------------OPEN------------------------

VAGEO 1442
10W 11R J

There are 2 types of sensors that can be connected to the gate operator for UL 325 monitored entrapment
compliance: non-contact sensors (photo eye) and contact sensors (edge sensors).

Monitored entrapment protection devices use 4 wires to connect to the board. From the device, connect the

RELAY

COMMON

to the board

COMMON

and the

NORMALLY CLOSED

relay contact to the assigned

MON_OPEN

MON_CLOSE

input. Connect the power wires to the

COMMON

and

MON-12/24VDC.

IMPORTANT:

You must use the MON-12/24VDC to properly monitor entrapment protection devices. To turn this

voltage on for

initial setup

, press reset button on the board.Do not use the 24 VDC terminal on the board’s terminal

strip.

NOTE:

The power to the

MON-12/24VDC

terminal will be off when the gate is at rest (not moving). It will be normal to

see the

MON_OPEN

and

MON_CLOSE

LEDs when the gate is closed. If the auto close timer is

OFF

it will do the

same when the gate is at rest in the open position. Also, if no devices are connected both of these lights will stay ON.

Please refer to the device manufacturer wiring instructions for details (on next page), making sure to follow the
normally closed wiring directions. Some devices may work on monitoring interfaces other than normally closed.

Should there be a need for more than 1 entrapment protection device for each direction, use a multi-input module
from Miller Edge (model: MIM-62).

MON_CLOSE

(LED will indicate when an obstruction is detected or device is not present)

This input is only for the monitored entrapment protection device for the close direction.
When the gate is closing, it will open to the full open position if an obstruction is sensed
and resets the automatic close timer. This input does nothing in the opening direction. If a
device is not connected or the board senses a fault (MON_FAULT LED will turn on), the
operator will only work with a constant pressure actuated switch. Once the obstruction is
cleared, the gate will operate normally.

MON_OPEN

(LED will indicate when an obstruction is detected or device is not present)

This input is only for the monitored entrapment protection device for the open direction.
When the gate is opening, it will reverse for 2 seconds and stop if it senses an obstruction.
This input does nothing in the closing direction. If a device is connected and the board
detects a fault (MON_FAULT LED will turn on), the operator will only work with a constant
pressure actuated switch. Once the obstruction is cleared, the gate will operate normally.

36VDC MANUAL (09.2020)

Monday, August 31, 2020 8:58:11 AM