6
Operating and service manual
4. Operation
alkitronic®
EAF
The
alkitronic® EAF
must not be damp or wet, neither
operated nor stored in moist or humid environment.
Always provide rain protection. Before first use al-
ways fully charge the battery pack. Before any later
use always check the charge status of the battery
pack and recharge, also in case of power decrease.
4.1 Starting
4.1.1
alkitronic®
Li-Ion battery pack
Remove / charge / insert or change
5
6
7
Push safety catch (5), pull battery pack to the front (6).
Push the battery pack com-
pletely onto the seat of the
charger.
Push the battery pack into the battery seat of the power tool
all the way (7) until the safety catch locks audibly.
4.1.2 Battery pack, capacity and signal display*
Push button (8) on the battery pack and check the
charge status. If the battery pack is almost empty it
must be recharged! Replace the battery pack on the
power tool.
If one of the LEDs flashes the battery pack is almost
empty. The electronic circuitry protects the battery
pack against damage due to complete discharge. Re-
place battery back on the power tool. Recharge bat-
tery pack!
* The charge status indicators are approximate and may be
slightly different depending on the battery pack type.
8
8
Remove battery pack
Charge battery pack
Insert battery pack
