alkitronic EAF Скачать руководство пользователя страница 5

5

battery powered torque multiplier

3. Operating the 

alkitronic®

 

 

charger station 

  

The charger station must only be used if the 

mains electrical supply matches the voltage and 

frequency specifications on the type label of the 

station. The charger station is an electrical device 

creating a direct current which can trip simple 

residual current circuit breakers (RCCB). Use type 

F or better, with a trigger current of no more than 

30 mA.

 

Before using the charger station make sure that 

the ventilation slots are not covered or blocked. 

The minimum distance to other objects should 

at least 5 cm!

3.1   Self-test

Plug the main plug into 

a suitable outlet. The 

warning indicator (4) and 

the operation indicator (3) 

will light up in sequence 

for approx. 1 second; the 

built-in fan will run 

for approx. 5 seconds.

3.2   Starting

Charging: 

push rechargeable battery pack (1) completely 

onto the seat (2). The operating indicator will start to flash

To check the charging level of the battery pack first remove 

the pack from the charger and then push the button on the 

battery pack.

Trickle charging: 

If the battery pack is fully charged the 

charger statin will switch automatically to trickle charging. 

The battery pack can be left in the charger and ready for use 

any time. The operating indicator (3) will remain lit

Fault: 

The warning indicator (4) is lit permanently; the bat-

tery pack is not charged. This is due to the temperature be-

ing too high or too low. Once the battery pack temperature 

is between 0°C and 50°C charging is started automatically.

If the warning indicator (4) flashes check for correct seat of 

the battery pack, or the battery pack is defective. Immedi-

ately remove the battery pack from the charger.

2.3 

Hazard notices

 

 

In case of mechanical or electrical damages to the 

alkitronic® EAF

, Li-Ion rechargeable battery pack 

or the 

alktronic®

 

charger station

, the use of the 

specific device must be interrupted immediately. 

The damaged unit must be inspected mechanical 

or electrical damages and safety. Any defects must 

be repaired by qualified personnel and before 

renewed use.

  

Before

 repairing mechanical or electrical compo-

nents or devices always disconnect the recharge-

able power pack and the mains power supply from 

the power supply to the power tool.

  

 

Protect rechargeable battery packs (1) 

against damp and wetness and do not 

subject to open fire!

 

  Do not use deformed or defective battery packs! Do 

not attempt to open battery packs! Do not touch 

or short battery pack contacts! Keep away from 

small metal objects that could cause an electrical 

short between contacts; a short circuit can cause 

fire and physical injury through burns.

 

A slightly acidic and flammable liquid may seep 

out of defective Li-Ion rechargeable batteries!

 

If the battery liquid comes into contact with hu-

man skin immediately rinse with plenty of water. 

If battery liquid comes into contact a human eye 

immediately rinse and wash with plenty of water 

and consult a physician!

 

  Do not attempt to charge non-rechargeable bat-

teries. Explosion risk!

 

Do not recharge fully charged batteries!

 

Do not use the charger station out 

of doors. Protect the charger station 

against dampness and wet!

 

Keep children away from the charger station and 

the work area!

 

In case of smoke or fire from the charger station 

immediately pull out the electric mains supply 

plug!

 

Do not insert objects in the ventilation slots of the 

charger station - risk of electric shock or short circuit!

Warning indicator

Operation indicator

3

4

2

1

Содержание EAF

















Отзывы: