90
Application Setting > Blind Detection
The bland detection means the inside/outside area detection. When the inside/outside object can
be move to leave/enter the area, the function will be trigger.
Open the setting frame by clicking on the area to blind. To move area to monitor, drag the area with
your mouse; to adjust the size of the frame, drag the arrow to adjust after you move the mouse to
the edge of the area and left-click.
Area:
There are 3 frames available for setting: Area 1, Area 2 and Area 3. Click
AREA
button to open
the detection area then click the signal checkbox to enable the function.
Sensitive:
Adjust the Sensitive of the area by entering the degree of sensitivity in the “Sensitive” field.
The setting range is from 0 to 100. “0” is least sensitive, “100” is extremely sensitive.
Time threshold:
Adjust the stay time to detect the object in the area.
The setting range is from 0 to 100 seconds.
Select
Save
to complete and activate your settings.
Blind Detection
Setting area
