70
General:
Name:
Name the trigger event here, and input the length must from 1 to 24.
Response to event trigger: the time setting of the trigger event
Always:
Always monitoring
During time:
Check the date you want to monitor (Sun~Sat) and the duration of monitoring here.
For example, if you want to set the camera to monitor from 7 pm after work to 7 am next morning
from Monday to Friday, check the boxes from Monday to Friday, enter “19:00” in the “Start From”
field, and enter “12:00” in the “Duration” field.
Never:
Don’t set up the time to the event setting.
Video Source:
Select the video input source.
Trigger by: sources of trigger events (Note: You can only set one trigger event once.)
Alarm input:
The alarm is triggered by the security equipment connected from the DI terminals
behind the machine, such as door/window detectors, infrared sensors.
Motion Detection:
The alarm is triggered when motion is detected. The camera will send an alarm
when any objects appear in the set detection area.
On Boot:
The alarm is triggered by reboot. The camera will send an alarm when the system is
rebooted due to power shortage, sabotage, or other reasons.
Video Loss:
The alarm is triggered by video loss. The camera will send an alarm when the camera
signal is loss due to power shortage, sabotage, or other reasons.
Blind Detection:
The alarm is triggered when blind is detected. The camera will send an alarm
when any objects disappear in the set detection area.
Net Loss:
The alarm is triggered by net loss. The camera will send an alarm when the net is loss
due to power shortage, sabotage, or other reasons.
NOTE
：
The Add Event setting page and the Add Schedule setting page are basically the same except that the Add Schedule
setting page does not have the option “Trigger by” and “Upload
video/image to server
” to indicate the sources of the
trigger event.
Some function cannot enable some r
esponse process.
