19
M-SMS: Allows SMS text communication with Motorola DMR radio.
H-SMS: Allows SMS text communication with Hytera DMR radio.
(62)
CTC ste
Squelch Tail Eliminate(STE) setting with CTCSS.
(63)
No-Signal Ste
Normal Squelch Tail Eliminate(STE) setting(no signaling).
(64)
Hand Type
Set for different microphone use.
Uart-Det: For EMS-88 microphone use.
Volt-Det: For simple PTT microphone(no display) use.
(65)
Time Zone
Set up the time zone of your location.
(66)
Date Time
Time Set: Allows to set up the date and time manually. Use the channel
swtich to set the current year. Move to the month by pushing channel
switch. Set the month, and push the channel switch to move forward
each step. Once done, click the Menu key to save the date and time.
GPS Check: When GPS is positioning successfully, enter this menu,
select GPS check to do the date & time correction automatically.
2. Chan Set
Channel set menu Route: Main Menu- Settings - Chan Set. The channel
set menu will change accordingly to the channel type. When the channel
type is digital, it will automatical hide the analog menus.
※
Chan Set (Digital Channel)
(1)
New Chan
Allows creat a new channel and save current set up to the new channel.
a. Select "New Chan", then input new channel number and confirm.
b. Input channel name and confirm.
c. Select a zone and confirm. The new channel will be saved to the
selected zone.
(2)
Delete Chan
Allows to delete current channel.
a. Select "Delete Chan",the radio will remind " Delete? "
b. press confirm, the current channel will deleted.
Note: After delete one channel, the radio will move to next channel.
(3)
Channel Type
A-Analog : Set up to analog channel.
D- Digital : Set up to digital channel
A+D TX A: Mixed analog, allow receive analog and digital signal, TX is
analog.
D+A TX D: Mixed digital, allow receive analog and digital signal, TX is
digital.
(4)
TX Power
Set up the TX power for current channel.
(5)
Offset
Press [UP]/[DOWN] to adjust offset frequency.
(6)
Band Width
Only narrow band 12.5KHz for digital channel.
(7)
RX Freq
Input the RX frequency by keypad, click the Menu key to save, press P2
key to return.
(8)
TX Freq
Input the TX frequency by keypad, click the Menu key to save, press [P2]
key to return.
(9)
Talk Around
Allows a Repeater Channel to be used as Simplex. When the TX radio
and RX radio both are set up with Talk Around on, they can communicate
directly without a repeater. The analog channel will use the RX frequency
as TX/RX frequency, the RX CTCSS/DCS decode as TX CTCSS/DCS
encode.
7
MAIN MENU FUNCTIONS
