background image

 

Handling this product

The manufacturer declines any responsibilities against loss of life and 

property due to a failure of this product when used with or as a part of a 

device made by third parties.

Use of third party accessory may result in damage to this product.  It will 

void our warranty for repair.

Be sure to reduce the audio output level to minimum before using an 

earphone or a headset.  Excessive audio may damage hearing.
Do  not  open  the  unit  without  permission  or  instruction  from  the 

manufacturer. Unauthorized modification or repair may result in electric 

shock, fire and/or malfunction and voids warranty.

Do not operate this product in a wet place such as in a shower room.  It 

may result in electric shock, fire and/or malfunction

.

Do not place the product in a container carrying conductive materials, such 

as water or metal in close proximity.  A short-circuit to the product may 

result in electric shock, fire and/or malfunction.  

 

In case of emergency

In case of the following situation(s), please turn off the product, 

switch off the source of power, then remove or unplug the power-

cord.  Please contact your local dealer of this product for service 

and assistance.  Do not use the product until the trouble is 

resolved. Do not try to troubleshoot the problem by yourself.

When a strange sound, smoke and/or strange odor comes out 

 

of the product.
When the product is dropped or the case is broken or cracked.

 

When a liquid penetrated inside.

 

When a power cord (including DC cables, AC cables and 

 

adapters) is damaged

PRECAUTIONS:

 

Maintenance

Do not open the unit and its accessories. Please consult with your local 

dealer of this product for service and assistance

 

 

 Alert

 

Environment and condition of use 

It is recommended that you check local traffic regulations regarding the use of 

a radio equipment while driving. Some countries prohibit or apply restrictions 

for the operation of radios and mobile- phones while driving. 

Do not use this product in close proximity to other electronic devices, 

especially medical ones.  It may cause interference to those devices. 

Keep the radio out of the reach of children. This product is not a toy and 

contains small part that may be dangerous when swallowed. 

In case a liquid leaks from the product, do not touch it. It may damage your 

skin.  Rinse with plenty of cold water if the liquid contacted your skin. 

Never operate this product in facilities where radio products are prohibited for 

use such as aboard aircraft, in airports, in ports, within or near the operating 

area of business wireless stations or their relay stations. 

Use of this product may be prohibited or illegal outside of your country. Be 

informed in advance when you travel. 

The manufacturer declines any responsibilities against loss of life and/or a 

property due to a failure of this product. 

Do not use multiple radios in very close proximity.   It may cause interference 

and/or damage to the product(s).

For your safety, turn off then remove all related AC lines to the product and its 
accessories from the wall outlet if a thunderstorm is likely.

Содержание DR-138HT











































Отзывы: