Alienware P111F, Руководство по обслуживанию

Страница: 61 / 74

Palm-rest and antenna assembly
Removing the palm-rest and keyboard assembly
Prerequisites
1. Follow the procedure in
Before working inside your computer .
2. Remove the base cover .
3. Remove the battery .
4. Remove the wireless card .
5. Remove the solid-state drive .
6. Remove the solid-state drive bracket .
7. Remove the fans .
8. Remove the rear I/O-cover .
9. Remove the power-adapter port .
10. Remove the headset port .
11. Remove the display assembly .
12. Remove the speakers .
13. Remove the touchpad .
14. Remove the keyboard-controller board .
15. Remove the system board .
NOTE: The system board can be removed and installed along with the heat sink. This simplifies the removal and installation
procedure and avoids breaking the thermal bond between the system board and heat sink.
16. Remove the I/O-board .
17. Remove the keyboard .
18. Remove the power button .
About this task
The following image(s) indicate the location of the palm-rest and keyboard assembly and provides a visual representation of the
removal procedure.
Steps
After performing the pre-requisites, you are left with the palm-rest and keyboard assembly.
61