Alienware P111F, Руководство по обслуживанию

Страница: 40 / 74

Next steps
1. Install the
rear I/O-cover .
2. Install the base cover .
3. Follow the procedure in After working inside your computer .
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in
Before working inside your computer .
2. Remove the base cover .
3. Remove the battery .
About this task
The following image(s) indicate the location of the speakers and provides a visual representation of the removal procedure.
Steps
1. Disconnect the speaker cable from the system board.
2. Open the latch and disconnect the keyboard-controller board cable from the system board.
3. Peel the tape that secures the speaker cable to the palm-rest and keyboard assembly.
4. Remove the speaker cables from the routing guides on the palm-rest and keyboard assembly.
5. Lift the right and left speaker, along with its cable, off the palm-rest and keyboard assembly.
Installing the speakers
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
40