Alienware Area-51 ALX, Руководство по обслуживанию

Страница: 65 / 88

Replacing the Processor Cooling Assembly
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before Working Inside Your Computer . After working inside your computer, follow the instructions in After
Working Inside Your Computer . For more safety best practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
Procedure
CAUTION: Incorrect alignment of the processor liquid-cooling assembly can damage the system board and processor.
1. Align the screw holes on the processor liquid-cooling assembly with the screw holes on the chassis.
2. Replace the screws that secure the processor liquid-cooling assembly to the chassis.
NOTE: The original thermal grease can be reused if the original processor and processor liquid-cooling are reinstalled
together. If either the processor or the processor liquid-cooling is replaced, use the thermal grease provided in the kit to
ensure that thermal conductivity is achieved.
3. Apply thermal grease between the processor liquid-cooling assembly and the processor.
4. In sequential order as indicated on the processor cooling-assembly, tighten the captive screws that secure the processor liquid-
cooling assembly to the system board.
5. Connect the processor liquid-cooling assembly fan and the processor liquid-cooling assembly pump-fan cable to the connectors
on the system board.
Post-requisites
1. Replace both the left and right side-panels. See “ Removing the Side Panels ”.
2. Replace the stability foot .
65