Alienware Area-51 ALX, Руководство по обслуживанию

Страница: 52 / 88

Removing the Full-length Graphics Cards
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before Working Inside Your Computer . After working inside your computer, follow the instructions in After
Working Inside Your Computer . For more safety best practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
Prerequisites
1. Remove the stability foot .
2. Remove both the left and right side-panels. See “ Removing the Side Panels ”.
Procedure
1. Lay the computer on the right side.
2. Locate the graphics (PCI-Express x16) connector on the system board. For more information on the graphics connector, see
“ System Board Components ”.
3. Press and hold the securing tab on the clamp.
4. Pull the clamp away from the bracket.
a. clamp
b. bracket
5. Press and push the screw covers covering the screws that secure the graphics card.
6. Remove the screws that secure the graphics card to the chassis.
7. Press the releasing clips on the power-cable connectors to disconnect the power cables from the graphics card.
NOTE: The location of the power supply connector varies depending on the video card installed.
52