52
2.
Select channel where PTZ camera is installed next to
Camera
label.
3.
Enter PTZ settings so it matches that of the PTZ camera.
4.
Click OK button to save and exit menu.
9.3
Setting PTZ Presets, Patrols & Patterns
Your DVR allows you to customize presets, patrols and patterns for a connected PTZ
camera. Before setting presets, patrols and patterns, it is important to understand some of
the features of the PTZ control panel, shown below.
Interface
The controls on the PTZ panel include:
1. Directional Pad/Auto-scan Buttons:
Controls the movements and directions of the
PTZ. Center button is also used to start auto-scan of PTZ.
2. Zoom:
Used to zoom in and out with the PTZ.
3. Focus:
Used to adjust the focus of the PTZ.
4. Iris:
Used to open up or close the iris of the PTZ.
5. Speed:
Adjusts the movement speed of the PTZ.
6. Light:
Turns PTZ light (if applicable) on and off.
7. Wiper:
Turns PTZ wiper (if applicable) on and off.
8. Zoom In:
Instantly zooms PTZ in.
9. Center:
Centers PTZ.
9.3.1 Customising Presets
Presets can be set to move your PTZ camera to a desired
preset
location at the click of a
button.
To setup and use custom PTZ presets:
1.
Enter the PTZ Control interface, shown in figure 9.1 by clicking PTZ in the menu or
the PTZ button on the front panel.
2.
Select the Preset button to enter the Preset Management menu.
3.
In the Preset Management menu, shown below, you may:
Configure Preset:
Use the PTZ control panel to adjust the position of the preset. Select a
Preset number and click the Set button to save preset location.
Clear Preset:
Select a Preset number and click the Clear button to delete the preset. You
may also select the Clear All button to delete all presets.
Call Preset:
Select a Preset and click the Call button.
Note:
Only valid presets can be called and deleted.
Intelligent Security and Fire Ltd
