17
5.
Click the Next button. This will take you to the
HDD Management
window shown.
6.
To start HDD management, click the Enter button.
7.
If a new HDD was recently installed, select the HDD from the list to initialise it.
Initialising the HDD will format and remove all data from it.
8.
After the HDD has been initialised, click the OK button which will take you back to
the Setup Wizard window.
9.
Click the Next button. This will take you to the
Record Settings
window, as shown
below.
10.
To enter the
Record Settings
window, click the Enter button.
11.
Select the
Schedule
tab, shown in Record Settings Menu.
12.
Click the Edit button. This will open up a new recording schedule, shown below.
Intelligent Security and Fire Ltd
