22
3.6 Configuring Live Preview Displays
Live Preview displays can be customised to your own needs. These settings can be
accessed by entering the Display Settings menu.
• Video Output:
Designates the output to configure the settings for. Outputs include
Main Vout and Auxiliary Vout. (Vout is video out)
• Mode:
Designates the display mode to be use for Live Preview (Spot out only one
window).
• Dwell Time:
The time in seconds to
dwell
between switching of channels when
Start
Sequence
is selected in Live Preview.
• Camera Order:
The order of the cameras to be used in the selected display mode (See
Setting Camera Order
).
• Enable Audio Output:
Enable/disable audio output for the selected video output.
• Event Output Port:
Designates the output to show event video on.
• Event Dwell Time:
The time in seconds to show event screen.
Note:
DVR will automatically detect if a VGA display is connected. If VGA is
connected, main CVBS will not show you any images. If VGA is not connected, main
CVBS will show you main GUI.
Note:
Spot out only one window. VGA cannot work together with Main CVBS.
3.7 Setting Camera Order
Setting the camera order allows you to logically position cameras for more efficient
monitoring of your own individual location.
To access the Display Settings
menu:
1.
Click the MENU button.
2.
Click the Settings icon.
3.
Click the Display icon.
The settings available in this
menu include:
Note:
Spot out only has one window division
To set the camera order:
1.
Enter the Display Settings menu,
shown in Figure 5 (Menu > Setting > Display).
2.
Click the Set button.
3.
Select the display mode you would like to set
the camera order for under
Mode
.
4.
Using the up and down button at each display,
select the camera you would like to set. Setting an
X
will mean the camera will not be displayed.
Click the OK button.
Intelligent Security and Fire Ltd
